Accessories

(1) BBE DS48 4x8 Loudspeaker Processor
(1) Crown XLi 2500
(2) Crown X4000
(1) Crown XTi 6002
(1) 40' 4 ch. XLR Fan to Fan
(1) L5-20 Break In (From Edison)
(1) L5-30 Break In (From Edison)



Product Description

Our 200 amp racks are optimized for X-Array 4 way configurations as well as other 4 way speaker systems. This amp rack is only capable of running at 120V and each amp channel can drive a 4 OHM MINIMUM LOAD.

- Input panel includes two 3 pin twist-lock inlets (included in package) as well as 3 XLR inputs routed to processor inputs A through C respectively which is paralleled with a locking Neutrik RJ45 input connector for use with our 4 channel CATDRIVE Cat5e/Cat6 snake systems.

- Output panel includes 2 NL8 left and right outputs as well as 2 NL4 left and right outputs for subwoofers. Pinset 1 on the NL4 connectors are wired for subs on the bottom X4000 and pinset 2 is wired for second X4000 (just above.) Pinsets 1 and 2 on the NL8 connectors are paralleled with the third X4000 driving the low mids for use with X-Array wiring scheme, while pinset 3 is wired for high mids on the fourth X4000 and pinset 4 is wired for highs on the above XLi2500. Processor outs 1-4 are respectively low to high LEFT (ch 1 all amps), while outputs 5-8 are respectively low to high RIGHT (ch 2 all amps).

- NL4 Pinsplit Breakouts are required for configurations where 2 dual driver subwoofer enclosures (8 ohms per driver) are deployed per side and are wired pinset 1 only, as well as enclosures that are wired pinset 1 & 2 paralleled. Sub enclosures wired for one 8 ohm driver per pinset, or a single dual driver subwoofer enclosure per side do not require NL4 Pinsplit Breakouts.

Attachments

DS48 Manual

XLi and X Series Manual